Concrete cutting in Bryan TX - clean, straight edges after we check what's inside
Need a trench for a drain line, a section of driveway out or a doorway in a wall? We scan first, then cut it clean.
- Licensed and fully insured.
- Free on-site estimates.
- Replies within 1 business day.
What's involved in cutting concrete in Bryan?
Concrete cutting in Bryan means sawing a straight, clean line through a slab, floor or wall with a diamond blade, so you can open a trench for plumbing, take out a broken section of driveway or add a door or window without breaking up more concrete than you have to.
Most calls start with something that has to get through the concrete, like a plumber who needs to reach a drain, a cracked panel you want replaced or a wall you'd like to walk through. The price moves with how thick the concrete is, how much steel is in it, how many feet of cut there are, whether it's a floor or a wall and whether you want the pieces hauled away. The schedule turns mostly on the scan, on an engineer's say for any wall opening and, near the street, on whether the city wants a permit. I look at all of that when I come out, and your written estimate spells out the method and what's included.
How do you know your concrete needs cutting?
A drain under the slab
If a plumber has found trouble in a line under your floor, someone has to open the concrete to reach it, and a saw cut leaves a clean edge to patch where a hammer cracks everything around it. Waiting on a leaking drain lets water keep working under the slab, which makes the eventual repair bigger.
One sunken or broken panel
When one section of a driveway, patio or walk has dropped or shattered and the rest still sits fine, a saw line lets us separate that part so only it gets replaced. Left alone, the edge turns into a trip hazard and the broken pieces keep shifting and chipping.
A doorway that isn't there
Wanting a door or window through a concrete wall is the cut that needs the most planning, because the wall may be holding up more than you'd guess. Waiting costs you nothing here, but booking a saw before the planning is done can cost you plenty.
How we handle concrete cutting, start to finish
I walk the job with you and we mark the cut lines on the concrete, so the line is settled before any blade spins. Before the saw touches anything, we scan to find rebar, the steel bars inside that hold the slab together, along with anything else running through it. For an opening in a wall, we want an engineer's input before we go any further. Then we cut along the marked line, check the edges and clean up the work area.
Cutting is often the first half of a bigger job. If we cut out a failed section, we can pour it back as part of concrete driveway building or concrete patio construction, and on new pours we saw control joints, shallow grooves that give the slab a place to crack in a straight line instead of wandering across it.
Cutting out a damaged section
This suits a driveway, patio or walk where one area has failed and the rest is sound, because a saw cut around it gives the new concrete a clean edge to meet. It usually costs far less than tearing out the whole slab.
Trench lines through a floor
This suits a slab house where plumbing under the floor needs work, since two straight cuts let a narrow strip come out instead of a ragged hole. The strip is ready to patch once the line underneath is fixed.
Openings in concrete walls
This is for a new door or window, and a field guide on cutting says an opening in a bearing or shear wall changes how the wall carries its load, so the size, the spot and any new lintel, the beam across the top, are the engineer's call. That's why we want the engineer first, and then a wall saw running on a track makes the cut.
Get a written estimate for your concrete cut
We reply within one business day to set a time. I come out and walk the job with you for a free on-site estimate with no obligation, then send a written estimate with the method and what's included.
(979) 393-7028- Based in
- Bryan, TX 77803
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM
What happens after you call us about cutting concrete?
Here's how a cutting job runs from your first call to the day we pack up, and who you'll be dealing with at each step.
Call or send us the form
Tell us where the cut is, whether it's a floor or a wall and roughly how long it runs, and we'll set a time for me to come out. If it's a wall opening, let us know whether an engineer is already involved.
I walk the job with you
I look at the concrete, where the cut goes, what's likely inside it and how water moves across the area, since a fresh cut gives water a new path. You'll hear what I see and what I can't know until the scan is done.
Go over the written estimate
The estimate spells out the method and what's included, so you can see what the price covers before you decide anything. I go over it with you until it makes sense.
Cut day, with me leading
I lead the crew myself, and we plan the cutting inside Bryan's construction hours of 7 a.m. to 7 p.m., Monday through Saturday, because other hours mean asking the city with a reason and a door hanger for the neighbors. Before we pack up, I walk the cuts with you and show you how to look after them until the next step.
Why Bryan homeowners call Modern Bryan Concrete Construction for cutting
I quote it and I lead it
I come out myself to look at the job and give the estimate, and I'm on site leading our crew when the saw runs. You don't have to explain your job twice to someone who never saw it.
Licensed and fully insured for cutting
We're licensed and fully insured. That matters on a cutting job, because the blade goes into concrete that can hide steel, cables or wiring, and you shouldn't be the one carrying that risk.
Trained on city curbs and walks
I learned concrete on a municipal crew pouring curbs, sidewalks and driveway aprons, then started this business in Bryan in 2021. That's the same strip by the street where the city has a say before anyone cuts, which I explain below.
Concrete is easy to cut and impossible to put back, so the planning matters more than the saw. Tell us about your job and I'll come take a look.
Cutting driveways, walks and slabs in Bryan
Near the street, the city decides. Bryan's Engineering Services issues the permits to cut, dig or excavate in the city's right-of-way, the public strip that usually takes in the sidewalk and the driveway apron at the curb. Its list names sidewalk and driveway repair but not concrete cutting, so the list alone doesn't settle whether your cut needs a permit. We check with that office before we cut, and when a job needs a permit we take care of the application before work starts, and I'll tell you what we found out. The city also requires building contractors and subcontractors to register every year before they can apply for permits, which is worth asking about with anyone you're thinking of hiring.
A lot of our cutting calls come from slab houses where a plumber needs a way under the floor, and from driveways and patios where one section has dropped or broken while the rest still sits fine. In both cases we cut the smallest clean opening that does the job, because every extra foot is more to patch. We get the same calls on jobs in College Station and Navasota.
Questions about concrete cutting in Bryan
How much does concrete cutting cost in Bryan, TX?
Professional slab saw cutting across the US usually costs about $4 to $15 per linear foot for the sawing itself. Steel and depth push a job toward the top of that range, and a small job may be priced by a minimum charge instead of by the foot. Your written estimate gives you the figure for your own cut.
Which saw do I need to cut a concrete floor or a wall?
A floor, slab or driveway takes a walk-behind flat saw, and a wall, a steep face or an overhead cut takes a wall saw that runs on a track. A door or window in an existing wall calls for the wall saw, once the engineer has settled the opening as I described above. Your estimate names the saw so you know what's coming.
Does a concrete slab need to be scanned before cutting?
Yes, a field guide on cutting says to scan before any cut to find rebar, post-tension cables and live conduit, the pipes that carry wiring. A post-tension cable is steel stretched tight inside the slab, and cutting one lets that tension go all at once, which can collapse the slab and kill someone. Scans have limits where steel is crowded, the signal fades or the scanner can't reach, so a scan that finds nothing isn't proof nothing's there, and I'll tell you where ours left questions.
Does the price of concrete cutting include removing the concrete?
Not always, because sawing and hauling are separate jobs and some cutters make the cuts and leave the panels where they lie. Our quote says plainly whether we haul off the cut pieces or only make the cuts, so you know before you agree to anything.
What is the best way to control dust when cutting concrete?
Cut wet, or cut dry only with a vacuum dust extractor running, which is what a field guide recommends to stop silica dust where it starts. Wet cutting feeds water into the cut to cool the blade and hold the dust, and that leaves slurry, a gray watery paste, so the industry's sample specification calls for planning how it's collected and disposed of with the owner before work begins. It's worth settling where it goes before the saw starts.
How do I get ready for a concrete cutting job?
Point out where you want the cut, clear the area around it and tell us about any pipes or wiring you know of under the slab or in the wall. For a wall opening, bring in an engineer before you book the cut, and decide whether you want the pieces hauled off. Then call (979) 393-7028 or send the form, and I'll come take a look.
Related concrete work after the cut
Concrete driveway building
Once a sunken driveway section is cut out, the opening needs a new pour on a packed base that lines up with the old concrete.
Concrete patio construction
If cutting a patio for a drain or a new walkway leaves more broken than sound, a fresh patio with planned joints can be the better fix.
Concrete cutting service areas near Bryan
Modern Bryan Concrete Construction is based in Bryan, Texas, and we cut concrete there and in the cities around it. The three cities below have their own pages, including College Station and Navasota, and we work in other cities nearby too.
Bryan, TX
Tell us where your concrete needs cutting
If you have the cut's location, whether it's a floor or a wall, its rough length and whether you want the pieces hauled off, I can come out ready to look at the right things.