Concrete floor installation in Bryan TX - a flat slab ready for your flooring
Need a floor for a new room or shop? We pour it on a packed base and let it dry before your flooring goes down.
- Licensed and fully insured.
- Free on-site estimates.
- Replies within 1 business day.
What does a new concrete floor in Bryan involve?
Concrete floor installation in Bryan means preparing the ground, placing concrete over it, then finishing and curing it into a floor slab for a room, a shop or an addition. Done right, you get a flat, solid floor that's ready to use, or ready for tile, wood or vinyl once it has dried.
Most people who call about a floor are adding a room, closing in a shop or replacing an old slab that cracked, sank or ruined the flooring on top. The price moves with the size in square feet, how much digging and base work your ground needs, whether the slab gets steel inside it and whether it will be covered or left as bare concrete. The schedule turns on the weather, any permit the city wants, and the drying time if flooring is going over it. Your written estimate spells out the method and what's included, so you can see where the money goes. If the slab will also be the foundation for a new building, that's slab foundation building, which has its own design steps.
How do you know it's time for a new concrete floor?
Cracks that keep getting wider
A thin crack by itself isn't much to worry about, but cracks that open wider each year, or an edge that sits higher than the rest, usually mean the ground underneath has moved. Patching them buys you a season, and the tile or flooring over them keeps breaking in the meantime.
Flooring that lifts or smells damp
Curling vinyl, popped tile or a musty rug usually means moisture is coming up through an old slab with nothing under it to stop it. New flooring laid over that slab fails the same way, so your money does more good going into the floor underneath first.
A floor that sinks or holds water
A low spot where water sits after you hose the floor, or a corner that has dropped, usually points to a base that was raked level instead of dug out and packed. It tends to keep sinking, and anything framed on top of it starts to bind.
How we handle concrete floor installation
We start by digging out to firm ground and packing the subgrade, the base the slab sits on, because a base that's only raked level settles later and takes the floor down with it. Then we set the forms, check where water runs so it heads away from the house, lay the membrane and the rebar, the steel set inside the slab to hold it together, and pour. Once the surface is finished we cut control joints, shallow lines that give the slab a planned place to crack, so cracks follow the lines instead of wandering across the room. If tile, wood or vinyl is going over the slab later, I build the drying time into the schedule from the start, so nobody's rushing it at the end. When a budget gets tight, people ask whether to save on the base or the finish, and I'll tell you to keep the base, because it's buried on day one and it's what decides whether your floor stays flat.
A new floor usually connects to something, so we also pour concrete steps where the floor meets a doorway, and concrete pool decks when a new room opens onto the pool.
A floor that will get tile, wood or vinyl
This suits a room or an addition, and it needs a vapor retarder, a plastic membrane under the slab, to keep ground moisture out. The membrane can't pull out the water mixed into the concrete, so the slab still has to dry before you cover it. We'll decide together whether to pour right on the membrane, which blocks moisture better but is harder to finish, or on a gravel layer over it, which is easier to finish but can hold water and slow drying if it gets rained on.
Bare concrete for a shop or storage
This suits a workshop, storage room or barn where the concrete is the finished floor. We can trowel it smooth so it's easy to sweep, or give it a broom finish, a light texture dragged across the top so it's less slick when it's wet.
Get a written estimate for your concrete floor
We reply within one business day to set a time. I come out, walk the job with you and look at the ground, then follow up with a written estimate. It's free, and there's no obligation.
(979) 393-7028- Based in
- Bryan, TX 77803
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM
What happens after you call about a new floor in Bryan?
Here's how a floor job runs from your side, from the first call to the day I show you how to care for the new slab.
Call and set a visit
You call (979) 393-7028 or send the form, and we set a time for me to come out. I walk the job with you, hear what you want and look at the ground and how water moves across it.
Go over the written estimate
You get a written estimate that spells out the method and what's included, so you can see what each part of the price pays for. I go over it with you until it makes sense, including anything we'll only know once the ground is open.
Pour day, then aftercare
I lead the crew on pour day, and in hot weather you can expect an early start and shade over the fresh slab, which a concrete group outside Texas advises, within the City of Bryan's stated construction hours of 7 a.m. to 7 p.m., Monday through Saturday. Before we pack up, I show you how to look after the concrete while it cures, which is the slow stretch when it hardens and gains strength.
Why Bryan homeowners call Modern Bryan Concrete Construction for floors
I walk your job and lead it
I come out myself to look at the ground and give the estimate, and our crew does the work with me leading it on site. The person who explained your floor to you is the one standing on it on pour day.
Trained on a municipal concrete crew
I learned concrete pouring curbs, sidewalks and driveway aprons for a city crew, and ended up showing new hands how to do it right. I still explain each step as we go, so you can judge the work instead of just paying for it.
Licensed and fully insured, every pour
We're licensed and fully insured. A pour puts a loaded truck and a working crew on your property, and that's not a risk you should be carrying.
Ask about Bryan contractor registration
In Bryan, building contractors and subcontractors register with the city every year to be able to apply for permits. It's a fair question for anyone you're comparing, and I'm glad to answer it at the estimate.
A floor is only as good as the ground under it and the time it gets to dry, and our work is backed by our satisfaction guarantee. Ask for a site visit and I'll look at yours.
Concrete floors, permits and clay soil in Bryan
Building permits in Bryan come from the city's Development Services department, and whether your new floor needs one is the city's call, so I don't guess. When it does, we check with the right office and take care of the application before work starts, and I'll tell you what we found out.
Most of Brazos County's soil is high shrink-swell clay, which swells when it's wet and shrinks when it dries, and that movement can shift a foundation. That's why the base work I described above matters so much here, and why I look hard at drainage so rain doesn't keep soaking under one side of your slab. If the floor will also be a building's foundation, a Texas engineering firm calls a geotechnical report, a study of the soil by an engineer, essential for designing it on this clay. We check the ground the same way on jobs in College Station and Navasota.
Questions about concrete floors in Bryan
How much does a concrete floor cost near Bryan, TX?
A concrete slab or pad in the College Station area usually costs about $5 to $10 per square foot. That's the going rate in the area, not a quote of ours, and reinforced slabs run a little higher per square foot than plain pads. Staining or stamping isn't included in that range, and your written estimate gives the figure for your floor.
Will my new concrete floor crack?
Probably a few small cracks, yes, because national slab guidance says some random cracking should always be expected and reinforcement won't prevent it. What steel that's sized and placed right does is keep those cracks tightly closed. I'd rather tell you that now and show you how we keep yours tight than have you surprised later.
How long does a new concrete floor take before I can walk on it?
A slab should be walkable within about 48 hours, though concrete takes 28 to 30 days to fully cure. Waiting a week before heavy loads like a car, a tool chest or loaded shelving is the safer plan, so hold off moving heavy things in until then.
How do I know when a new slab is dry enough for flooring?
Your flooring maker sets that, since many makers require specific moisture tests and limits before their product goes down. Plan those tests early rather than the week before the installer shows up, and I'll fit the drying time into your schedule as we planned it.
Who issues building permits in Bryan, TX?
Bryan's Development Services department issues building permits, the same office I mentioned above. Applications go through the city's online portal, and when your floor needs one, we file it before work starts.
What causes a new concrete floor to turn dusty or weak on top?
Usually the top dried too fast, from a pour in midday heat or a slab nobody kept moist after it was finished. Guidance calls for curing right after placement with a curing compound, steady soaking, a wet burlap or plastic cover, or curing paper, which keeps the moisture in so the surface hardens properly.
Other concrete work that goes with a new floor
Concrete steps construction
A new floor often needs a way in and out, and poured steps at the door are built to match its height and carry daily foot traffic.
Concrete pool decks
If the room you're adding opens onto a pool, the deck outside needs a grippy finish and drainage that sends splash water away from the house.
Service areas for concrete floors near Bryan
Modern Bryan Concrete Construction is based in Bryan, Texas, and pours floors there, in College Station, in Navasota and in other cities around them. The three cities listed here each have their own page.
Bryan, TX
Book a site visit for your floor
Have the floor size in square feet and the flooring you plan to put down ready, so the first visit can cover what your slab needs.