Garage floor concrete in Bryan TX - a slab planned for how you'll use your garage
Cracked, stained or sinking garage floor? We plan the new slab around your cars, your tools and any coating or lift you might add.
- Licensed and fully insured.
- Free on-site estimates.
- Replies within 1 business day.
What goes into a new garage floor in Bryan?
Garage floor concrete in Bryan means breaking out a tired floor if there is one and pouring a new slab on a packed base. We saw control joints into it, which are straight cuts that give the slab's normal shrinkage cracks a planned place to form instead of letting them wander across the floor.
Most people call because the old floor has cracked, sunk at one end or started to flake, or because they're building and want it done right the first time. The price moves with the size of the garage, whether an old slab has to come out, how thick the slab needs to be for what you'll park or bolt down on it, and any prep for a coating. The schedule turns on the tear-out, the weather on pour day, any permit the city requires and the curing wait before you can park. Your written estimate spells out the method and what's included, so you can see what you're paying for.
How can you tell your garage floor needs replacing?
Cracks that keep widening
A hairline crack is normal, but a crack that opens wider every year or has one side higher than the other usually means the ground underneath has moved. If you wait, water and grit work into the crack and the edges start breaking off.
One end sitting lower
When the floor dips toward a corner, or water pools by the door instead of running out, the base under that spot has usually settled or washed out. The longer water sits there, the more the ground under it softens and the dip grows.
Dusty, flaking top
A floor that leaves gray dust on your shoes or peels in thin chips usually has a weak top layer, often from a hot-day pour or a finish worked too wet. That layer keeps wearing away, and a coating won't hold to it until it's dealt with.
How we build garage floor concrete
Before anything else, I ask whether a car lift or a floor coating might come later, because either one changes how we plan the slab, and for a lift we get the lift maker's concrete requirements first and build to them. Then our crew breaks out the old floor if there is one, digs down to firm ground and packs the subgrade, which is the dirt and base the slab sits on, so it supports the whole floor evenly, old utility trenches included. We set the forms so the floor drains out toward the door, lay in rebar, the steel that holds the slab together if it cracks, then pour, finish the top and saw the control joints the same day. If the budget gets tight, I'd rather you skip a fancy finish than trim the base, because the base is hidden on day one and it's the part that decides whether the floor stays flat.
If you'd like color or a pattern instead of plain gray, that's our decorative concrete work, and it can go on the same new slab. When the garage sits into a slope and the ground beside the drive needs holding back, we build concrete retaining walls too.
Everyday parking floor
This suits most homes, where the garage holds a car or two, bikes and a workbench. We build it to the thickness that use calls for, with a smooth, hard top that sweeps clean.
Lift-ready or heavy-use floor
This suits a home shop, a planned car lift or a heavy truck parked every night. We settle thickness and reinforcement for that load before the pour, since you can't add either one once the slab is down.
Get a written estimate for your garage floor
We reply within one business day to set a time, then I come out, walk the garage with you and follow up with a free written estimate. There's no pressure to book.
(979) 393-7028- Based in
- Bryan, TX 77803
- Hours
- Mon–Fri: 8 AM–11 PM, Sat–Sun: 7 AM–11 PM
What happens after you call about a garage floor in Bryan?
Here's how a garage floor job runs from your first call to the day you park on it, and who you'll deal with at each step.
Call or send the form
You call (979) 393-7028 or fill out the form, and we set a time for me to come see the garage. It helps to know the floor's size and whether a lift or a coating is in your plans.
Walk the garage with me
I look at the old floor, the ground and how water moves around the door and the downspouts, and I hear what you'll use the space for. You get a written estimate that spells out the method and what's included, and I go over it with you until the numbers make sense.
Permit, prep and pour day
Any permit gets sorted out first, as I explain further down the page. On pour day I lead the crew myself, and we plan around summer heat and wind so the top doesn't dry out before it's finished.
Learn how to care for it
Before we pack up, I show you how to look after the new concrete and when it's ready for feet and then for cars. Curing takes a while, so we'll talk through when you can move back in.
Why Bryan homeowners call Modern Bryan Concrete Construction for garage floors
The owner estimates and pours
We're based in Bryan, and I come out myself to look at the garage and write the estimate, then I'm on site leading our crew on pour day. The person who explained the plan to you is the one standing there making sure it gets built that way.
Taught on a city crew
I learned concrete on a municipal crew pouring curbs, sidewalks and driveway aprons, ended up training the new hands, and started this business in 2021. You get someone who explains each step so you can judge the job, not just pay for it.
Insured for work at your house
We're licensed and fully insured, so you aren't carrying the risk of a crew working on your property. Our work is backed by our satisfaction guarantee.
You can't add thickness to a slab after it's poured, so the plan has to be right first. Send me the details or call, and I'll come walk your garage.
Garage floors, permits and drainage in Bryan
In Bryan, permits come from the city's Development Services department, and whether your garage floor needs one is something we check with the city before we start rather than guess. If it does, we take care of the application before work starts, and I'll tell you what we found out. The city takes applications only online, through its portal, which is also where review comments come back and inspections get scheduled, so an inspection can set the pace of the job. The city also has contractors register every year before they can apply for permits, which is worth asking anyone you hire about.
Water is the other thing I look for, because a slab floor starts to fail when water soaks into or dries out of the ground under it, and downspouts emptying right beside a garage are a common source. I walk the outside edges and point out any water that needs carrying away before the pour, and we look for the same thing on jobs in College Station and Navasota.
Questions about garage floor concrete in Bryan
How much does a new concrete garage floor cost near Bryan, TX?
In nearby College Station, a reinforced concrete slab usually costs about $6 to $10 per square foot, before any staining or stamping. Where your floor lands depends on its size, its thickness and any coating or lift prep. Your written estimate gives your own figure after I've seen the garage.
How long does a new garage floor take before I can park on it?
You can usually walk on a new slab within 48 hours, but it's safer to wait about a week before heavier loads like your car go on it. Concrete takes a month to fully cure, so plan on the garage being out of use that first week and go easy on it after that.
When can I put an epoxy coating on a new garage floor?
Not until the concrete's moisture and surface texture have been checked, because a young or dirty floor can look dry and still keep a coating from bonding. Moisture, oil and curing compounds all affect the bond. If the garage will be heated, cooled, coated or joined to living space, vapor control under the slab, usually a plastic sheet that slows ground moisture, may matter, so tell us before the pour.
Is wire mesh enough for a garage floor that holds heavy vehicles?
Usually not, because mesh adds little strength to a thin slab and mostly holds the crack edges together once a crack forms. For heavier loads the better plan is a thicker slab. In College Station, home floor slabs run four to six inches, and garage slabs sit at the thicker end.
What causes cracks in a new garage floor?
Most cracks come from concrete shrinking as it dries, which is why control joints are sawn in, usually within hours of the pour, with the timing set by the temperature and the mix. Hot-weather problems generally show up in summer and get worse as the wind picks up. Ask any crew when they'll cut the joints and how they handle a windy summer pour.
Do I have to tear out my old garage floor before pouring a new one?
If the old floor has sunk or cracked through, usually yes, because pouring over it carries the same problem up into the new slab. Breaking out the old floor adds a demolition cost on top of the new slab. I'll tell you which way your floor should go once I've looked at it.
Other concrete work around your garage
Decorative concrete
If plain gray isn't what you want underfoot, color, stain or a pattern can give the garage or the drive leading to it a finished look.
Concrete retaining walls
When your garage or driveway is cut into a slope, a retaining wall holds the soil back so it doesn't slump onto the slab or undermine it.
Service areas for garage floors near Bryan
Modern Bryan Concrete Construction is based in Bryan, Texas, and pours garage floors there, in College Station, in Navasota and in other cities around them. The three cities below have their own pages, with more on the work we see in each.
Bryan, TX
Get your garage floor planned before the pour
Call (979) 393-7028 or use the form with the garage's size, whether the old slab comes out and any coating or lift plans, so I can bring the right questions to your visit.